Question

An engineer configures a CUBE to send calls to an ITSP that rejects any called number containing a leading plus sign. Inbound calls from CUCM arrive with called numbers in +E.164 format (e.g., +14085551234). The engineer creates the following: 'voice translation-rule 10 / rule 1 /^\+/ //' and 'voice translation-profile TO-ITSP / translate called 10'. Where must this translation profile be applied so that the plus is stripped before the digits are sent to the ITSP?

Accepted Answer

As an outgoing translation-profile on the outbound VoIP dial peer facing the ITSP

Answer

As an incoming translation-profile on the inbound dial peer matching calls from CUCM

Answer

As an outgoing translation-profile on the inbound dial peer matching calls from CUCM

Answer

Under the global voice service voip configuration so it applies to all dial peers