Question

You are configuring single-area OSPFv2 on router R1. Interface GigabitEthernet0/0 has IP address 10.1.4.17/28. You want to enable OSPF process 1 ONLY on this specific interface using the network command in router configuration mode. Which command correctly advertises this interface in area 0?

Accepted Answer

network 10.1.4.16 0.0.0.15 area 0

Answer

network 10.1.4.17 0.0.0.255 area 0

Answer

network 10.1.4.16 255.255.255.240 area 0

Answer

network 10.1.4.0 0.0.0.15 area 0