Question

You are given a YANG model based on ietf-interfaces and ietf-ip. An engineer must configure GigabitEthernet2 with a primary address of 10.1.1.1/24 and a secondary address of 10.1.2.1/24. In the ietf-ip module, the 'address' node under the 'ipv4' container is defined as a 'list' keyed by 'ip', and the secondary designation is expressed with the 'netconf-central' style vendor augmentation leaf 'secondary'. Which JSON payload correctly represents both addresses under this YANG-based data model?

Accepted Answer

"ietf-ip:ipv4": { "address": [ { "ip": "10.1.1.1", "prefix-length": 24 }, { "ip": "10.1.2.1", "prefix-length": 24, "secondary": true } ] }

Answer

"ietf-ip:ipv4": { "address": { "ip": "10.1.1.1", "prefix-length": 24, "secondary-ip": "10.1.2.1" } }

Answer

"ietf-ip:ipv4": [ { "address": "10.1.1.1/24" }, { "address": "10.1.2.1/24", "secondary": true } ]

Answer

"ietf-ip:ipv4": { "address": [ { "ip": "10.1.1.1", "netmask": "255.255.255.0" }, { "ip": "10.1.2.1", "netmask": "255.255.255.0", "secondary": true } ] }